Under Cabinet LED Reading Flexi Strip Light Factory

Even though we are one of leading manufacturers who wholesale freezer light, it is undeniable that we also receive a lot of questions about the freezer light, such as the freezer power is on, the running light is not on, and the freezer light is not on, and the freezer light is not on. Check the reasons below and freezer maintenance tips.

The freezer power indicator flashes constantly?

The power connection of the freezer lamp is faulty. It should be a weak fault. It is recommended to check the plug and socket for such a fault. Finally, fix the circuit again, preferably by electric welding.

Why the freezer light is not on

1. The running indicator is damaged or disconnected.

2. The thermostat malfunctions, causing an open circuit.

[Specific reason]

• If it occurs after the refrigerant is refilled, the light can be turned off, and the low pressure is insufficient.
• Insufficient high pressure and lack of fluorine, after repairing the leaking part, because the dust sticks to it and does not dissipate heat, I am also Mitsubishi, and I can start the unit. This fault usually occurs when it is started for the first time after installation.
• The yellow light keeps flashing, you can analyze and judge the fault from the following points, because the temperature is too high.
• Exhaust pressure, check whether the compressor is stuck in the cylinder, please ask maintenance personnel to deal with it, it may be too much refrigerant.

The freezer running light is always on, but can't start?

Open the case, replace with a new buffer tube, or tighten the screws. If the compressor can operate normally, then you can check whether the refrigerant in the refrigeration system is used up. Specific judgment method: You can let the freezer run for 3-5 minutes , Cut off the power supply, and listen to see if there is a sound of water flow. If there is no sound, it means that the refrigerant in the refrigeration system has been used up or leaked. It may also be that the compressor has lost the ability to work.

Solution: If there is a system leak, look for After passing through the leaking part of the system, perform welding repair, pressure test, and after the evacuation is qualified, add refrigerant to a certain amount, usually according to the evaporator is full of frost or the freezer reaches the rated temperature.

In order to reduce the occurrence of such problems, we suggest to refer to the following maintenance methods

How to care of the freezer

1. The show cupboard should be actually positioned in a freezer on a level ground, although the usage environment is a lot better. Do not rest. The inside atmosphere where the show fridge freezer is placed need to be effectively aired and dry out. The top of the freezer must be actually greater than 50cm from the ceiling, the left as well as appropriate edges need to be much more than 20cm away from various other things, as well as the face must be more than 20cm away from various other objects.

2. Recently acquired or even moved show cupboards must be actually permitted to mean 2 to 6 hrs just before turning on. Prior to usage, the empty cabinet needs to be actually vitalized as well as competed 2 to 6 hrs, as well as it can easily certainly not be begun promptly after closure. You need to have to wait for much more than 5 minutes to stay clear of melting the compressor. Generally, the equipment placement of the thermostat of the freezer requires to be readjusted suitably according to the time, ambient temperature, and also utilization.

wholesale flexi light supplier&manufacturer, china oem flexi light factory

Replace with a new wholesale freezer light

If the above methods cannot solve the problem of your freezer light, it is recommended that you choose a professional freezer light wholesaler to give you professional suggestions and solutions so that your freezer will continue to provide the most powerful support for the products you sell.

Under Cabinet LED Reading Flexi Strip Light Factory