Wholesale Under Cabinet Light Supplier Factory

Now when people buy furniture lights, they not only consider the brightness of the light, but also the shape of the light. Because good-looking lighting can become the soul of home decoration.

But do you know how to choose the right furniture light? This blog will tell you about the purchasing skills and maintenance methods of furniture lights.

Purchasing skills of furniture lights

⭕It should be selected according to the height of the room.

When the height of the room is less than 3m, long suspender chandeliers and crystal lights with high sag should not be selected, otherwise, it will hinder safety.

⭕It should be selected according to the room area.

The lighting area shall not be greater than 2% - 3% of the room area. If the lighting is insufficient, the quantity can increase, otherwise, the decoration effect will affect.

⭕It should be selected according to the decoration style.

Chinese, Japanese and European lights should coordinate with the surrounding decoration style in order to avoid giving people a messy feeling.

⭕Pay attention to the room environment.

For example, in special environments such as toilets and kitchens, lights with special functions of moisture-proof and waterproof should select to ensure normal use.

⭕The lighting of the ceiling light shall be selected according to the bearing capacity of the top of the room.

Especially for the top of the ceiling, there must be enough load to install appropriate lights.

Use and maintenance of furniture lights

1. After buying the lights, don't be busy with installation. You should look at the marks of the lights, read the installation and operation instructions, and install and use the lights according to the provisions of the instructions, otherwise, there may be a danger.

1. Replace the aged light tube in time according to the light source parameters provided by the sign. If it is found that the two ends of the light tube are red, the light tube is black, or there is a dark shadow, and the light tube can not jump on, replace it in time to prevent unsafe phenomena such as ballast burnout.

1. During cleaning and maintenance, you should be careful not to change the structure of the light and do not randomly replace the parts of the light. After the cleaning and maintenance, you should install the light as it is, and do not miss or wrongly install the light

1. In order to prolong the service life of lights, it is necessary to strengthen the maintenance during use.

Pay attention to the following points:

• The lights in the room should be wiped with a dry cloth frequently, and attention should be paid to prevent moisture intrusion, so as to avoid rust damage or leakage and short circuit after a long time;

• Lights installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise, its service life will be greatly reduced;

• The lights installed in the kitchen should pay special attention to anti-oil smoke because the accumulation of oil dirt will affect the illumination of the lights;

• Light-colored lampshade has good light transmittance, but it is easy to stick ash. Be diligent in cleaning to avoid affecting the penetration of light;

• If the light is non-metallic, it can be wiped with a wet cloth to avoid dust accumulation and hinder the lighting effect;

• When using lights, try not to switch frequently, because, at the moment of a frequent startup, the current passing through the filament is greater than the current during normal operation, which makes the filament temperature rise sharply and accelerate sublimation, which will greatly reduce its service life. Therefore, the switching of lights should be reduced as much as possible.

If you are looking for a furniture lights supplier, we hope to be your choice and provide you with high-quality products.

Wholesale Under Cabinet Light Supplier Factory