Door PIR Switch Factory Supplier

Up to now, China's induction measurement technology has been very advanced. The product that can best reflect this technology is the PIR switch. It is widely used in daily life, which is very convenient! As a professional PIR Sensor Switch oem, today we will introduce some knowledge about the PIR switch.

There are several kinds of PIR switches

According to the installation method, it is classified as follows:

• Wall type PIR switch

• Ceiling type PIR switch

According to the wiring mode, it is classified as follows:

• Single line PIR switch

• Two-wire PIR switch

• Three-wire PIR switch

• Four wire PIR switch

Where can the PIR switch be installed?

It can be installed in staircases, elevators, toilets, and corridors, which are generally public places. When someone walks into the PIR switch, the switch will automatically open when it feels the heat of the human body, so the light came on. After some time, the switch did not feel the heat, so it turned off automatically and the light went out. In meeting rooms, offices, and toilets, people don't have to turn on the lights and don't have to worry about whether the lights are turned off when they go. This is very convenient, reduces a lot of trouble, and saves energy.

In addition, the PIR switch can also be installed in the disinfection place without the switch of medical staff, to ensure health and safety. If it is used in hotels and other places, there is no need to plug in the card to have electricity. If you use the PIR switch, you can also know whether there is someone inside, which can avoid a lot of misunderstandings. This design is particularly humanized! When used in the bedroom, it can be darkened or lightened slowly, so you don't have to worry about forgetting to turn off the lights in bed. It's better to use it on the air conditioner. If you accidentally forget to turn off the air conditioner, the PIR switch will help you do these things. Isn't it very considerate?

What should be paid attention to in the installation of the PIR switch?

?The top-mounted PIRswitch should not be too high from the ground, preferably between 2.5-3 meters. The wall-mounted PIR switch can be installed at the position of the original switch for direct replacement.

?When installing the PIRswitch, it should be far away from air conditioning, refrigerator, heating, stove, led nixie tube, control lamp, and other places sensitive to air temperature change.

?There shall be no partition screen, large bonsai, furniture, or other isolators within the detection range of the induction switch.

?Do not turn the switch directly to the window to prevent false alarms caused by hot air flow disturbance and personnel walking outside the window.

?Do not install the switch at the door, air duct, and other places with strong airflow.

?Do not operate with power on during installation, and power on after installation.

?Do not use beyond the power range.

If you want to wholesale PIR switch, we look forward to being your choice, any interests, welcome to contact us!

?Tel: 86-574-62795970            ?Email: www.technic-lighting.com

Door PIR Switch Factory Supplier